The awesome mouse sets out to conquer a problem I have yet to see solved in the maker community, a 6DOF, 3D-printable 3D mouse to use for CAD programs (and other modelling applications). I use a name-brand 3D mouse at work most days, but one day I came home and wanted the same capability here. After discovering the cost of a normal 3D mouse ($150-400) and realizing that only one company had a monopoly on 6DOF mice, I set out to make my own. One that is 6DOF, mostly 3D printable, cheap, and open source.
There’s a video introduction that talks a little about it and shows a bit of usage.
The canonical proprietary version of this is the SpaceMouse.
These are used in concert with a traditional mouse, with the 3d mouse being used for navigation of the 3d space. They have six degrees of freedom (as in, you can rotate in any axis or you can push it in any axis) so you can rotate and you can pan any which way with full control.
If you’ve ever gotten frustrated in a 3d program trying to figure out the correct sequence of rotations to get to your preferred view, that’s the use case the 3d mouse addresses.
There’s a video introduction that talks a little about it and shows a bit of usage.
The canonical proprietary version of this is the SpaceMouse.
These are used in concert with a traditional mouse, with the 3d mouse being used for navigation of the 3d space. They have six degrees of freedom (as in, you can rotate in any axis or you can push it in any axis) so you can rotate and you can pan any which way with full control.
If you’ve ever gotten frustrated in a 3d program trying to figure out the correct sequence of rotations to get to your preferred view, that’s the use case the 3d mouse addresses.
Here is an alternative Piped link(s):
video introduction
Piped is a privacy-respecting open-source alternative frontend to YouTube.
I’m open-source; check me out at GitHub.