Hi all,

I am looking at building my next NAS. My current will move to offsite, and the new will be primary. I previously used this motherboard, and was planning to go with that again. Then I saw this one, which seems like a better option. It has a slightly better CPU and a PCIe slot, but can only have 32GB memory max compared with 64GB max on my current.

Am I missing anything or is this a no-brainer to switch to the N100 board?

  • NarrativeBear@lemmy.world
    link
    fedilink
    English
    arrow-up
    1
    ·
    9 months ago

    Seems like the N100 is your option if you are only choosing between these two. Personally I am in the same both as others here, where desktop hardware is my preference at the moment especially if I can find combo deals for mombo/cpu.

    Though my recommendation is to consider a board that would support PCIe for a potential LSI HBA card, stay away from any other sata expansion cards unless you don’t value your data.

    If you do ever pick up a LSI HBA card with support for either 8/12/24 drives I would also state to plug the whole pool into this card and not mix and match between onboard SATA connections and the card.

    A boot drive can still connect to a SATA connection on the board as it not part of the pool.