• mozz@mbin.grits.dev
    link
    fedilink
    arrow-up
    29
    arrow-down
    1
    ·
    3 months ago

    I, too, miss the days when you could write literally anything in XF86Config and that’s the signal it would send to your monitor. There was a warning in the docs that you could easily fry your monitor by sending a signal that it couldn’t handle that would cause physical damage so please be careful.

    Also, the good monitors came with an all-plastic screwdriver attached on the inside of the case, so that you would have one available that you couldn’t electrocute yourself with on the big capacitor since at that point you’d already revealed that you planned to open the thing up and start fuckin with it.

    It was wonderful days

    • r00ty@kbin.life
      link
      fedilink
      arrow-up
      8
      ·
      3 months ago

      I would have thought the plastic screwdriver was more likely to be able to adjust variable inductors/capacitors with minimal interference? Using a metal screwdriver you have to adjust, move it away check result since the presence of the screwdriver adjusts the result too.

      • mozz@mbin.grits.dev
        link
        fedilink
        arrow-up
        6
        ·
        3 months ago

        Oh, it might be that. That actually makes more sense.

        I just know that I always heard it as so you wouldn’t electrocute yourself, and that the first time I opened up a monitor for something and actually found one, I was beyond delighted