• schizo@forum.uncomfortable.business
    link
    fedilink
    English
    arrow-up
    1
    ·
    5 hours ago

    As a FunFact™, you’re more likely to have the SSD controller die than the flash wear out at this point.

    Even really cheap SSDs will do hundreds and hundreds of TB written these days, and on a normal consumer workload we’re talking years and years and years and years of expected lifespan.

    Even the cheap SSDs in my home server have been fine: they’re pushing 5 years on this specific build, and about 200 TBW on the drives and they’re still claiming 90% life left.

    At that rate, I’ll be dead well before those drives fail, lol.

    • Dariusmiles2123@sh.itjust.works
      link
      fedilink
      arrow-up
      1
      ·
      19 minutes ago

      How can you know how much life an SSD still has? Is it a command in the terminal on Linux? Haven’t found anything in the system information.

      • schizo@forum.uncomfortable.business
        link
        fedilink
        English
        arrow-up
        1
        ·
        10 minutes ago

        sudo smartctl -a /dev/yourssd

        You’re looking for the Media_Wearout_Indicator which is a percentage starting at 100% and going to 0%, with 0% being no more spare sectors available and thus “failed”. A very important note here, though, is that a 0% drive isn’t going to always result in data loss.

        Unless you have the shittiest SSD I’ve ever heard of or seen, it’ll almost certainly just go read-only and all your data will be there, you just won’t be able to write more data to the drive.

        Also you’ll probably be interested in the Total_LBAs_Written variable, which is (usually) going to be converted to gigabytes and will tell you how much data has been written to the drive.