![](https://lemmy.world/pictrs/image/6718c27e-43b9-42c4-be11-4597e8eec434.jpeg)
![](https://lemmy.world/pictrs/image/e4083c7c-83c3-4258-8370-708e95e309b3.png)
Have you tried power cycling your router?
A/S/L: Old enough 2 ASL/;3/Pits of despair
Pronouns: :3 / >:3
Mental Health: Dangerously unstable
Spoken languages: Cringe / Acadian French / English
Have you tried power cycling your router?
I’m sure one day they’re going to be selling those user created levels back to the users who originally created them.
Nice! You could try hitting it with varnish or stain! Makes the wood look much more convincing.
Edit:
Here’s an example of what it can look like
Edit 2 hahah: Just saw someone else had mentioned it and that you’ve already experimented with it in your original post in 3DPrinting
Basically non-existant but of course when it does happen it gets repeated over and over again. The main reason why anybody detransitions is because of how they get treated during their transition.
Hopefully it’s not too much of a pain in the ass, or at least leads to a fix. Good luck!
Bahaha damn yeah hahah I used to love Brice de Nice. Haven’t thought about that in ages!
Hahah yeah I figured. No worries it was pretty funny.
Edit: I actually don’t know what the actual translation of “Sick burn” would be now that I think about it.
Yeah that’s the thing, it’s my native language too hahah
Oof, thanks. Would’ve taken me a second.
Yeah I got the same thing where it seems to pull when it’s switching direction but it’s nowhere near as bad as how it is on yours. I’m thinking it might be a physical issue with your printer.
Actually noticed my settings were not “default” at all because I had selected options in the calibration test section. I just started an actual default print with a top, bottom, multiple walls and infill hahah.
I’m printing with grid infill. Gonna cancel and try with gyroid.
Well, I just printed a cylinder and my seams are just fine with “default settings”.
I say “default” because originally I saw some weird stuff in the preview but it turned out to just be because for some reason spiral vase mode was on by default.
Could you tell me where in OrcaSlicer you found this cylinder? I can’t seem to find it in the calibration tests.
Edit: Nvm found it hahah
Yeah that’s definitely a possibility. I’m just finishing up my start g-code, gonna see what happens if I try to print that cylinder. Hopefully my printer doesn’t blow up or something 🤞
Hmm, I’ve never tried OrcaSlicer. I’m curious, installing it now.
Is there a way I could see the file you’re trying to print?
Actually yeah, you might be on to something there. OP could try adjusting belt tension.
If you do end up adjusting belt tension though, make sure to recalibrate your e-steps after.
Did you notice this kind of thing happening before you switched your hot end? I’m assuming you’ve tested printing at a higher temp already but I have to ask anyway. 200C is kinda low for some PLAs.
I’m trans and I don’t think conservatives just hate other humans. I think they’re scared and they don’t want “bad things” to happen to their communities and their children. They know things are fucked up right now, and they are right about that. It’s something we can all agree on.
The problem is that they’re being offered a bunch of things to point the finger at as a cause of their misery, like LGBTQ+ people/rights, immigrants, diversity, etc. On the other hand, those of us who are left-leaning are being offered the same type of thing, except in our case, it’s them. The media is doing such a good job of othering both sides that we’ve lost sight of their humanity and we don’t even listen to a single thing they have to say. Nobody is there to agree with them when they’re right and nobody is there to actually have a conversation when they’re wrong. Both sides just write off everything the other side has to say. It has to stop. If you think that these people only care about guns, taking away abortion right and getting rid of LGBTQ+ people, you’ve been played.
Politicians won’t stop using these things as political tools until we stop giving them reasons to. It is working so well for them.
Reality is that both sides are being manipulated. People on the left and people on the right are the same people and in these times we need to actively make an effort to remember that. Saying that conservatives just need to die out is so ugly and dangerous.
We need to start talking to each other again. We need to stop the constant consumption of outrage. I know it’s not an easy thing to do but you can do it, it can be done. It is an addiction that is destroying us all and it doesn’t matter if other people still consume, these things start with “You”.