![](/static/253f0d9b/assets/icons/icon-96x96.png)
![](https://lemmy.world/pictrs/image/8286e071-7449-4413-a084-1eb5242e2cf4.png)
Just to be clear, if you’re in the US, you 100% have copyright protection as soon as you put pen to paper.
Just to be clear, if you’re in the US, you 100% have copyright protection as soon as you put pen to paper.
For the big products, I think Google Assistant will be next followed by barely doing anything further with Android Auto until it dies a few years after GAS starts getting pushed out while it probably either won’t or will stop supporting ‘legacy’ Android Auto apps, so AA dies ‘because developers aren’t supporting apps anymore – totally not our fault and we’re sorry to see this happen.’
Former Googlers have always said that the big issue with sustaining products at Google is that it is highly competitive and Google rewards new products, not sustaining current products. So, most people want to continuously join/form teams for new products leaving little resources for current products. This has been the way since Google started becoming a large company – so decades now.
This makes sense as to why Google puts out applications that seemingly do the same thing as something else but ever so slightly different and why there are sometimes cool new products that die on the vine years later and if there was no slightly different thing available it just dies or if there is then there is a half-assed migration.
In the Reddit AMA the Google Home team answered a few questions and only the very few softball ones. One interesting comment they made though is that because of the Nest products and generally new products, they believe it is a challenge to support the older hardware, including integrating Google and Nest hardware, so basically you get features removed to make it all work. Of course, there was the promise and supposed internal roadmap that puts these features back eventually, but we’ve seen that kind of promise over and over from Google and it rarely happens. They are trying to replace Assistant with their Gemini AI which you can do now but it comes with even less features (but parity is coming – they promise!..one day!). Is that parity with current Assistant which seems to be supporting less and less and working worse?
Google is losing a lot of consumer trust in products I think and it’s going to get worse for them as this trickles to the general consumer-base.
This list is so bad, it has to be a troll.
I accidentally overwrote /etc/passwd once and I allowed /boot to run out of space during a kernal update and I created a local user with the same user that was also on the realm/domain that I had joined and various bash script issues.
Some stuff I’ve had to fix that someone else did:
alternatives
and symlinked the old java from /bin to /home/theiruser/java – had sudo because he was a Windows domain admin.There’s more but I don’t want to keep going because it is Sunday and I don’t want to ruin it.
You can use Gnome Boxes to give you a front-end for KVM/qemu like VB. With the spice-webdavd package, you can share files similarly to the guest or send files directly to it.
As far as Samba goes, it is just a FOSS implementation of Microsoft’s SMB. Just like with Windows, you’ll have to open Explorer to the IP/Hostname of your Samba server or I guess have both join the same workgroup with the same name on the same subnet.
I apologize. I didn’t know I had replies when I deleted my post. Yeah I know you can set that behavior in some editors. And other than what I just replied with on another comment, I like tabs because I also don’t have to worry about styling guides that some set down as ‘2 spaces’ or ‘3 spaces’ or ‘5 spaces’ or whatever. It is basically just universally a horizontal tab.
Sorry I didn’t realize I had replied with I deleted my comment. I understand some editors allow you to set tab and you can set actual spaces, like in vi. However, personally I feel like hitting tab gives me the whitespace I want for readability already.
For programmatic parsing it is simple because it’s just looking for an HT.
deleted by creator
A 30% cut for steam games sold on steam and a 0% cut for steam keys sold by the publisher wherever they want with the caveat that they must give steam users the same sales at around the same time. They get their games hosted on Steam’s industry best CDN, a page with support for images and videos, an API with features users like, workshop API for mod hosting and delivery, and other SteamWorks API stuff for stuff like multiplayer, patch management without charging a fee for it, forum hosting to hit the highlights. Pretty much all of that drives engagement and is mostly turn-key though you do have to programmatically interact with their API when it makes sense.
Steam provides a lot of benefit for a 30% cut of what is sold on their store front and a lot more benefit for getting all of the above for a 0% cut if they sell steam keys outside of steam.
Sounds like you have nothing listening on port 80 that resolves for your domain for Let’sEncrypt to verify that you own the domain. You need a webserver listening on port 80 and that Certbot can access if you’re using the http method.
Basically you’re forwarding traffic to port 80 but there’s nothing on port 80.
Depends on if there’s an IPv6NAT and how your ISP converts between IPv4 and IPv6 or actually supports IPv6 straight through. It also depends on your router.
Currently, there’s still some debate since IPv6NAT (NAT66/NPT6/NATv6) isn’t really needed for WAN boundaries for the reasons NAT exists. However, without it you are right on that this will be a problem for the consumer because PCs, IoT devices, printers, circuts or whatever my wife has, etc. could all be exploitable and even worse, you may never know you’re contributing to the botnet.
As an example, I have a global IPv6 on a few on my devices. They can connect to IPv6 if it originates from me but if it originates from them or is UDP it doesn’t route to my IPv6. My router doesn’t care. It’ll route it just fine either way. It would appear that my ISP has me behind one of the IPv6 NATs.
I’d imagine that’s true for most people at home.
NAT provides some measure of security as pure coincidence to how it works. It is not designed or intended to provide security. It does not inspect packet payloads in order to filter them for security. It looks at the header and attempts to route it to an internal IP address (your devices on your LAN) and if it cannot, it will drop the packet because the header will only have the external IP address – the packet has no idea which device it is supposed to go to. Forwarding a port is telling the NAT to assume that when a packet hits a certain port, if it doesn’t know the destination internal IP, forward it to some internal IP anyway.
The reason you can connect to websites, ssh outside, FTP, whatever, is because your connection comes from your internal IP first to some other IP and therefore, NAT knows which internal IP to route those packets to.
Take for example this scenario:
You download some software. It has malware that provides command and control (C2) to someone else outside of your network. A firewall and/or antivirus may be able to stop this and hopefully notify you. NAT will not help here. Furthermore, if you have uPNP enabled (usually it is by default on your router) the malware can forward any ports through your NAT to the compromised device opening it up to bot attacks and the like.
Another scenario:
You want to play a video game with you and your friends and you’re going to host it. So either you manually forward those ports or perhaps uPNP just does it for you. That game has an exploit known by attackers, or perhaps it can just be DDoS’d. Your NAT isn’t going to stop that. Hopefully a firewall will help you here. It definitely will if you set up explicit rules so that if they aren’t your friend’s IPs it will drop them. Though it is possible the game is exploitable and your friend’s are compromised.
Take for example malware has been known to spread via Minecraft.
As I understand it, NAT is a firewall
NAT is not a firewall. NAT does not inspect packet payloads, it doesn’t do anything except attempt to route packets to where they are supposed to go. If the connection originates from outside or it is a ‘connectionless’ protocol, the NAT has no idea which internal IP to route to, so it drops the packet.
NAT provides some security by sheer coincidence and not by design.
Your immutable OS stays stable. For example, running a sudo pacman -Syu with a bunch of stuff from AUR in your Arch container for example will not bring down your OS or otherwise make it unstable. The immutable image you first install has been tested and it is the same image as the testers – same with the upgrades and updates, so long as you don’t overlap the image with rpm-ostree in this case.
Immutability keeps your OS stable and if something does happen to go wrong, you just roll it back.
If that isn’t something you need/want then that’s not something you need/want.
Yes, though keep in mind containers aren’t like VMs so the hardware isn’t virtualized or anything. The root system and everything in it is still immutable as well. In usage, it doesn’t matter for the container but it isn’t changing the root since what is writable to the container is outside of the root.
Using containers this way is the way Silverblue was intended to be used for by the user and pretty much any other immutable distro of note.
Are you saying you can’t use toolbox or distrobox for that?
You should be installing software with stuff like flatpak, toolbox or distrobox. If you treat the immutable image as a mutable one there really isn’t an improvement except for less of a chance of instability of updating/changing software that’s running in memory already.
I see some comments recommending wordpress but wordpress is a security problem, especially if you’re using 3rd party plugins. It is such a bad problem that their are ‘wordpress security’ applications but even then wordpress sites get hacked all the time. If you are going to use it, it is best to let some other host handle it for you if you don’t know a whole lot about what you’re doing.
There are many, many other content management systems out there. Some are lighter than wordpress and some heavier. They are all about posting and managing content. Most of them have some sort of user and authoring system. Once you’re webserver is set up, many are written in a mixture of php and python so setting them up is generally drag and drop with either minor configuration file edits or wizards. Many of them have sections that you can set up using a labeling/tagging system. Most of them allow you to have the ‘stories’ as private or draft where you have to actually click publish before people can view them. Some have user roles systems where you can limit viewing and even editing between different roles for sections.
Generally, once their setup is done, they are point and click to do everything.
Here’s a nice list of FOSS CMS’ (which includes Wordpress of course).