I suspect that there is “palm check” turned on for your touchpad. This is designed to keep you from accidentally moving/clicking the touchpad by brushing it with your palm while you are typing.
Look for a “palm check”, “palm rejection”, or “disable touchpad when typing” setting in your touchpad utility. As far as I know, these are all roughly the same thing.
If you look for a “watt meter plug”, you’ll pribably understand what it is at a glance. It’s a device you plug into your wall outlet (or surge protector or whatever). It has a power outlet on it, which you plug your device into, and a screen that shows watts drawn and watt-hours over time. Super simple. I think “Kill A Watt” is the most well known brand.
My friends and I called all annoying companion/escort characters “Buttfuck”. Natalia was the buttfuckiest Buttfuck.
I think this is helpful context from the actual report (linked at the top of the WaPo article):
In 2022, half as many (47%) of adolescent girls and young women acquired HIV as in 2010. Even with this decline, we are not on track to meet our 2030 target to end new HIV infections among adolescent girls and young women.
The global sex-distribution of new HIV infections among adolescents is driven largely by sub-Saharan Africa, which carries the overwhelming global burden of HIV. In 2022, 33% of older adolescents aged 15-19 years newly infected with HIV lived outside of the region. In the Middle East and North Africa region, the number of young people living with HIV has increased by 13% since 2010. In East Asia and the Pacific and Latin America and the Caribbean, two thirds of new adolescent infections, age 10-19 years, occur in boys. Stigma, discrimination, societal inequalities and violence sabotage the efforts of adolescents and young people to protect themselves against HIV and other health threats. Young key populations are especially vulnerable.
First, fair warning: I have little experience with repairing dishwashers and zero experience with that brand. I’m just a dude that likes diagnosing and fixing things.
Assuming that the internet steered you right and the error code is related to that sensor, how confident are you that the sensor is good and that it doesn’t have an intermittent failure? If I were in your shoes and the part is cheap, I’d replace it.
Great post, thanks! Looking at the pictures makes me feel like I must have played a different sierra war game using the same engine back in the day. It all looks very familiar, but I’m pretty sure I never played this.
I think there is a typo for you to fix; it sounds like the following should say to not just grab the best weapon:
Be careful, especially as a Confederate player to grab whatever the best, most high value weapon is within reach as the more expensive weapons tend to have higher rates of fire, which translates into more expense to keep the unit supplied with ammunition. Running out of supplies will turn the finest repeating rifle into a glorified club and make the unit easy pickings.
Ambrosia probably provided me the most hours of gaming entertainment over the 90s. They published Mac software and, if I remember correctly, most of their games were shareware and the non-paid versions were pretty well featured.
I wonder how many hundreds of hours I played Escape Velocity and Escape Velocity Override. Those were some absolutely amazing games and they supported plugins (mods) and had a thriving mod community.
For the 90s mac users, you’ll probably recognize a lot of their games (listed on the Wikipedia page). Here are some from the 90s that stand out to me:
Maelstrom
Chiral
Apeiron
Swoop
Barrack
Escape Velocity
Avara
Bubble Trouble
Harry the Handsome Executive
Mars Rising
EV Override
Ares
Escape Velocity Nova
Old farts unite! I’m right there with you, although I think my first wing commander game was 4. I think I did something similar with Myst to escape constant “hunting” on the disc drive. The noise of the cd drive revving up and down 2ft from my head is seared into my brain.
Can we meaningfully say that performance has improved over time when games are getting more graphically intensive and wasting all that potential? I would say a Nintendo DS running Tetris has more performance than a PS5 running that new Bethesda game
Yes, we can. Gamers and computer nerds have been measuring performance for decades. For example, see https://www.userbenchmark.com and https://www.digitalfoundry.net.
You could develop a benchmark around the DS version of Tetris, I suppose, but that doesn’t seem like a useful benchmark to me.
The rest of your question seems to be a value judgement that graphically intensive games are “wasting all that potential”. Kind of ironic considering you appear to be asking for objective ways to measure performance.
Optical drives were a major bottleneck in every gaming system that used them. They were convenient because they offered a lot of data storage for cheap, but the trade off was that games performed worse than they could. The fact that consoles have moved off of optical storage and onto fast internal storage is a boon to people that care about performance. That may be a sad situation for you, but a lot of people find it to be a good thing.
Just curious since you clearly know a lot about this stuff: What are your thoughts on the heat sinks being a part of the issue? Is there a decent chance the device could benefit from replacing whatever adhesive/paste was used to attach them? Or is that even doable?
Ever heard of Sealioning? Look it up. That’s you. Your posts are dripping with pseudo-intellectual “just asking questions” spittle.
Absolutely. There might be loot down there.
If I recall correctly, he says it is hard on his vocal chords to do the voice. Have you read something where he says he wants to keep doing the voice acting? Or might he be happy to move to an easier role?
Three thoughts:
I wonder if you would still have this take if you played a newer, high quality AAA game on a high end setup. I don’t mean to imply that your mind will definitely be blown — really don’t know — but it would be interesting to see what doing so would do to your opinion.
Gaming is about entertainment. There is no denying that better/bigger/smoother/more immersive tends to add to the entertainment. So devs push those boundaries both for marketing reasons and because they want to push the limits. I have a hard time seeing a world in which gaming development as a whole says “hey, we could keep pushing the limits, but it would be more environmentally friendly and cheaper for our customers if we all just stopped advancing game performance.”
There are SO MANY smaller studios and indie devs making amazing games that can run smoothly on 5/10/15 year old hardware. And there is a huge number of older games that are still a blast to play.
A total fine of $25m USD spread across three carriers. I have no idea what the scale is of the mobile providers are in SK. Is $25m much money or is this a US-style slap on the wrist fine (aka “the cost of doing business”)?
Old curmudgeons unite! I totally knew what you meant.
Edit: that said, I would add NVMe SSD as the way to go… although I think that is pretty much all you find these days. Are non-nvme m.2 drives a thing?
Thanks for the details! I’m sorry to say that I don’t know enough to help you very much. I have never tried looking for or working with non PVA wood glues. I suspect that even with PVA glue, you would have a hard time getting boards glued edge to edge stay at all true, so keep in mind you are likely to end up with some warp and unevenness that may show up later…. Actually I just had an idea that I think would work well - get/borrow a pocket hole jig and use that to do your edge joinery. A pocket hole jig is really a great tool that is easy to use. Check this out. Kreg is just the most common brand of pocket hole jigs. There are cheaper ones out there, although I can’t speak to which other brands are good/bad.
It may help if you clarify what you consider natural and synthetic wood glues. Do you mean you want to be able to collect the ingredients in the woods for some reason? Is there a particular type of chemical or other component in wood glue you are trying to avoid?
Also, what are you glueing to what? Right now, I just know that you want a desktop and you don’t want to make legs. Does that mean you are setting this desktop on the frame from your old desk? Are you gluing boards together on edge? Are you don’t joinery? I’m pretty sure that the type of gluing is going to matter, especially if you’re trying to find a glue that has undergone minimal processing.
Oh hell yeah. I want to see a Dendy reboot.