You will get leagues better picture quality using a camlink/capture card and a camera with clean HDMI out. A gopro is a good budget option but a used DLSR or mirrorless camera is going to be the best. Some DSLR and mirrorless cameras support video out over usb so you don’t even need a capture card. Here’s a guide on getting it to work on Linux with a camera capability list inside the guide. If you do want to go the capture card route I hear elgato’s camlink works in Linux.

Because the less tech savvy people will be confused when the battery starts getting full and charging speed tapers off which will lead to complaints about their 20w charger only providing 3w of power.

wanted to implement something like that with my 1920R UPS for my rack but haven’t found the time to commit to antiquated hardware.

Was enough of a hassle dealing with the expired SSL certs on the management card yet getting software running on one of my machines to communicate with the UPS.

Honestly you should just bypass dells management software and use NUT. It supports your UPS’s management card if you enable SNMP or you can bypass it all together and just run off of the USB/serial.

All things considered my two servers chilling chew around 60w on average, not taking into account my POE cameras or other devices. The UPS should run for over a day without getting close to draining its batteries (have a half populated ebm too).

I’m pretty surprised I can run my whole network for an hour off of my 1500va UPS with three switches and a handful of POE devices. I’m still thinking about replacing it with a rack mount unit so i can lock it inside my rack as I’ve been having issues with unauthorized people messing with it.

Anything using vanguard such as valorant and league of legends, battleye such as pubg, destiny 2, and rainbow 6 siege, and easy anti cheat such as fortnight blocks virtual machines. Vanguard is especially bad because it will not allow to run the game with Intel-VT/AMD-V enabled even if you are running bare metal as of its last update.

I think the safe option would be to use a smart UPS and Network UPS Tools to shutdown the LLM virtual machine when it’s running on battery. I do something similar with my NAS as it’s running on an older dell R510 so when the UPS goes onto battery it’ll safely shut down that whole machine to extend how long my networking gear will stay powered.

Did you do anything to increase the density of the cabinet for better acoustics? I know other 3D printed designs have you fill the empty space with concrete. Also if you ever design more speakers you should try out a paraflex design, it’s an open source style of speaker that emits a cardioid dispersion pattern on the low frequencies which makes it possible to aim those frequencies without involving a DSP and math. Unfortunately their main group is on Facebook though https://www.facebook.com/groups/bassaz/

The obvious awnser would be VR and AR where the faster the refresh rate is the less likely you are to get motion sick. A display with a refresh rate that high would be displaying a frame every millisecond meaning if the rest of the hardware could keep up a headset using this display would be able to properly display the micro movements your head makes.

Mold is actually the biggest concern with the most popular archival format LTO. EMPs aren’t that much of a concern. Bit flips and bit rot are your main concerns traditionally when using flash for archival storage. It’s recommended if you go the flash route to keep your array hot (ie powered on) and use a file system with data scrubbing capabilities such as ZFS.

OP is mostly correct, the construction grade boards the home centers sell are going to have some level of warping. If you don’t want to deal with that you need to go to an actual lumber store. There’s one in most cities. In Seattle (well Ballard…) Limback Lumber is a great place to visit.

Exactly especially when the default file system on windows is 30 years old.

ETX4 was released in 2006 and BTRFS was released in 2007.

ZFS is amazing but i wish it’s support for flash was better. I’m not sure if ZFS will ever be able to fully utilize flash since ZFS was designed around spinning disks and the pitfalls they provide. Maybe at some point F2FS will catch on…

It wouldn’t be the best of ideas because the flash used for SD cards do not have the same kind of write endurance as other types of flash media.

Maybe I’m missing something but how could finding out who’s yodeling a movie be rather easy when you would have to decrypt the traffic to determine if it was a movie and not just normal traffic? I get that because of TCP/IP you can tell someone is using I2P but wouldn’t you have to compromise the garlic encryption layer to determine what exactly they are doing?

If they are trying at great leghth to block IPs associated with piracy, it isn’t that much harder to get known VPN IPs blocked too especially when they could use the ‘why won’t someone think of the children’ card and claim VPNs are solely used for CSAM and drug markets.

The smart move would be to skip VPNs and move over to I2P. For those who don’t know I2P is kinda like if tor and torrents had a baby that was a VPN on crack. Unlike a VPN where your traffic is encrypted and sent to one centralized server, I2P encrypts and routes your data through multiple servers and unlike tor every client by default is a node that data can be routed through.

I’m not, the comment I was replying to literally called proton a “security and privacy” company.

deleted by creator

What’s even better is when your metrics are based on last year’s metrics so you better achieve exponential growth or start looking for another job.

Any ERP like odoo can do this and with odoo you can even make maintenance reminders. Just remember they are business software so you have to look through that lens.

You’d still need a base distro for the VM to run on. If OP goes the proxmox route they should do VGPU instead of pass through as it’s more flexible. Here’s the link to a guide on getting vGPU working with consumer grade nvidia GPUs