Article also says to root the phone to install custom OS rather than an unlocked bootloader.

Dyson Sphere doesn’t support cloud saves, not an issue with the Steam Deck.

I’ve also had some issues with Fez but find it works better now

Yes, this has been a thing for a while, just lots of old or out of date projects.

This is old but there are a number of ways to do this

https://www.xda-developers.com/guide-installing-and-running-a-gnulinux-environment-on-any-android-device/

https://github.com/meefik/linuxdeploy

https://linuxonandroid.com/

https://computingforgeeks.com/how-to-run-linux-on-android-devices-using-andronix-app/

Still no Dex, makes no sense when the SoC and hardware are more than capable.

Raspberry PI

Amen

The fractal Terra is small but not stackable; easy access to everything but sata drives. In the past I used a Sugo 13 but the psu takes up most of the space.

Lian li and Asus have some good micro atx options like the tu150 or the ap201. Overall small compact machines that stack are best suited to 1U/2U rackmounts in my experience

Remote play together and steams controller management are two separate things.

RPT creates a tunnel to make everyone appear in the same session.

For controllers, especially in Linux check that you have the correct settings enabled eg. Enable PlayStation/nintendo support vs the default Xbox emulation.

I’ve personally never had any issues with RPT and controller settings after checking the controller is setup properly in Steam.

In my experience I’m actually impressed with the ‘full simulation’ performance so far.

Absolutely it was released far too early, I’m looking forward to feature parity with CS1 and getting it to a proper state.

https://www.protondb.com/app/2600

For anything not Steam, Lutris.

Lutris because it handles both and more.

It supports wifi and usb, that’s what it says in the description of the app.

If you’re looking for a solution that requires no ‘sketchy’ client, this supports rtsp and a few other protocols. Works with obs virtual cam really well

https://play.google.com/store/apps/details?id=com.pas.webcam

https://play.google.com/store/apps/details?id=com.dev47apps.droidcamx

The cost of doing business means you should buy a license for each user that needs an account.

https://www.linode.com/community/questions/22605/can-i-set-up-a-smtp-relay-server-on-linode

Gnome terminal supports everything you’re asking for

https://help.gnome.org/users/gnome-terminal/stable/pref.html.en

TLDR, no

The cpu isn’t the only piece of the puzzle. 6.5 kernel is only just released, and at least just supported on Debian testing.

It’s not crazy that you haven’t setup any power saving profiles, or that the kernel doesn’t natively support these new chips and architecture.

HDMI 2.0 has limited support for high-res displays at 21:9. Check that your cables also are up to the task.

Running both the internal and external display at these high resolutions will be a challenge, only getting 30hz here makes sense.

I have mine setup on a Supermicro itx-based machine with an Intel n3710 and 8G of RAM. It has four Intel-based ports but you can easily get away with two.

I used to run a Zotac ci323 with dual Realtek nics. Works fine for 300M up/down.

You’ll want two ports, one for WAN one for LAN and most nics will support VLANs if you need more than that. Any VPN or encryption will increase your cpu requirements. If your needs are low a cheap dual-nic Nuc like device works great.