• 0 Posts
  • 8 Comments
Joined 1 year ago
cake
Cake day: July 3rd, 2023

help-circle


  • i’ve got basically the exact same setup as you, other than flipping the bed upside down to use the smooth side, and having the base ender3 instead of the pro (only difference there, given we’re both on mini e3v2’s is the y axis rail).

    a little spritz of aquanet on the nontextured side, and blocking out potential drafts can go a long way. also your first layer thickness is larger than your nozzle diameter, try bringing that down to at most 3/4ths, or 0.3 in this instance.

    all that out of the way, i’m printing 230/70 extruder/bed with petg and having no real issues to speak of.