I asked a similar question and I was lead to this post.

I got side tracked and eventually lost motivation to get it working. I might give it another try in the new year. Hopefully this is what you are looking for. I assume your distribution is using PipeWire, otherwise you may have to look into HRIR for PulseAudio.

I’ve been running into issues with trying to post the log file data. There’s something in there that causes the reply button to hang indefinitely.

This is the log file with the Config USB plugged in. This is the config settings I used.

For reference, This is the log file of the installation without the Config USB.

deleted by creator

I got the information by connecting to http://homeassistant.local:8123/

I get the following screen:

I put the log file here since it comes out as a long run on sentence in lemmy.

I have another SD card with a functioning version of HA OS that’s currently controlling my lights and switches. I don’t remember how I got the internet working with it but I can still connect to http://homeassistant.local:8123/ as well as directly through the wired IP address so I don’t believe the port is damaged. Unfortunately I can’t update it because I get an error about no internet connection. I can still add add-ons and such so It’s a bit confusing to me.

I only have a laptop computer so I don’t actually own a keyboard. I don’t know anyone nearby who I could borrow one from either.

I created the USB drive in Linux, as well as the file and assumed it was okay.

I did this: aa@DellG5:/media/aa/CONFIG/network$ file my-network my-network: ASCII text

I’m not sure if that helps, I just checked from here.

The actual router rented out by the service provider. I don’t think they would be happy with me messing with their property.

I also lived somewhere else where I didn’t have access to the main router so I use the extender as my personal network for file transfers, a few lights with a couple switches and my terrarium thermostat. If anything happens to the main router, I can just turn my extender into an access point and still have my personal network.

TP-Link requires an account to use my own extender which annoys me. Their app redirects my connection to my extender through their cloud service. It’s not my VPN because I can still connect through the browser. Seems shadey and I don’t like having the account already.

Fortunately the ISP provided modem/router has DNS support. I managed to install Adguard as an add-on in Ha OS. I just need to figure out why HA OS refuses to change my IPv4 address to static mode. After that I can change the DNS address and hopefully I can get rid of ads in my house.

So today I learned the difference between an integration and add-on in HA OS. Adguard seems like the most reasonable solution for me.

That makes sense. I guess it’s not necessary for me to put OpenWRT on there. More than anything, I’m just severely annoyed I must log into an online account just to access my WiFi extender’s settings. I can deal with that issue at a later time.

Fortunately I updated my BIOS from windows before switching to Linux and as of recently, I still have the latest version.

I added amdgpu.runpm=0 and that did increase stability considerably. My system froze up way less often which was great.

I also found that adding processor.max_cstate=1 has made my system even more stable and I haven’t had a freeze up in days now. This page gives a nice run down of what it does.

I wouldn’t be surprised if there is a freeze up in the future but overall my system has been a lot more stable making everything far more enjoyable.

That makes sense. I guess for my case it’s fine since I have more storage than I can use. Additionally, I keep my most important data on multiple offline storages and even that is quite minimal.

I have an AMD + AMD setup but apparently the Dell G5 series has issues with linux so it’s been an uphill challenge.

I did see that LMDE 6 makes it easy to boot different kernels at startup which is handy. I tried looking at Liquorix Kernel but I don’t think it’s ready for LMDE 6 just yet. I can’t recall exactly why but I got a big nope when trying to download it. I think I tried looking at the Zen Kernel as well but couldn’t figure out if it’s just for Arch or if it’s compatible with Debian.

Too much to learn and now enough hours or attention span. Slow progress but I guess it’s a thing to do besides watching my plants grow.

Thank you, that makes sense.

What reasons would people not like doing that?

I personally feel like separation of user data and OS data is easier for me to manage.

I’ve spoken to another user who has the same issue as me and they made a couple suggestions including disabling certain options in BIOS or trying a distribution with a newer kernel.

At first I thought it was issues with iGPU and dGPU switching but I’m beginning to suspect that’s not the case.

Reproducing when it freezes is a challenge because it’s very inconsistent and does not leave and crash reports.

The only improvement I’ve seen yet is switching from Linux Mint 21.2 to LMDE 6 but the kernel is still older compared to the versions that I was suggested for my hardware.

I would like to try a newer kernel just for the sake of trying.

That first bit makes sense, I should be able to figure that out I think.

The reason I want to avoid using an external drive is because it takes a minimum an hour to transfer 4 games worth of data currently. That time is an inhibiting factor for me. I’d like to minimize downtime.

Also I’d like to test gaming oriented distributions with newer kernels compared to what Linux Mint ships with.

I’m not experienced enough with linux to understand if this is a question or a statement on what I can do. In either case, I don’t know how to interpret what this means.

I tried the beta and liked it. The only issue I ran into was that the MozillaVPN app wasn’t working on debian.

I also had not seen much progress on the Debian version of the app from what I found. I could be wrong as that was my first dip into Debian.

Mullvad is available and I might switch to that at a later time when the motivation strikes me.

I prefer the idea of community driven projects though.

My system still freezes outside of Steam and gaming. My best guess based on searching around for issues related to my system is that Linux doesn’t handle switching from integrated to discrete graphics that well with amd+amd systems. Other users who have Dell G5 SE systems have had the same issue for at least 3 years now.

It’s tolerable because it doesn’t freeze while gaming and that’s the most intensive thing I do on my system. If I was writing or editing and it froze and I lost work constantly, I’d be more upset and annoyed.

Occasionally it will freeze just from opening discord or steam but the load up time is significantly shorter than a windows hard reset. It’s tolerable for me, for now.

I should also add, I can’t start steam normally. It still freezes constantly unless I start directly opening to steam Settings from the start menu.

Adding the command seems to work quite well. All of my games are launching just fine now with all the system updates applied. Which is great because the graphics and fps have improved considerably too.

I did some searching around and it seems the Dell G5 SE line seems to have issues in general with Linux. I tried installing Pop!_OS and the live USB would lock up constantly.

I’ll have to be patient and hope things get sorted out down the line. For now it’s tolerable with Mint, maybe I’ll try some other non-ubuntu distributions later when I’m in the mood and see how stable they are.

I may just switch to another distribution in the future when I have the time. I think I’m also traumatized by windows.

Usually I have to schedule an entire day reformatting and updating windows. Compared to setting up Mint the first time which took maybe a couple hours. A lot of that time was going through the settings just to set things to my preferences.

Still can’t shake the feeling of dread about installing a new OS when deep down inside I know it’s not so bad hahaha