You can self host with Vaultwarden! It’s just the server; you use the same Bitwarden clients.

Jumblie #252 🟠🔵🟢🔴 5 guesses in 43s https://jumblie.com

I’ve only been playing the past handful of games but it’s a fun daily puzzle. I find it interesting that I either get sub 5 minute times or over 50 minute times. Lol

It depends what you are painting! If you’re looking at smaller models/tabletop minis, you should take a look at setups used in the minipainting communities. Larger models might benefit from different setups. I know I didn’t want to start cheap and have to upgrade later, so I jumped straight for the Iwata HP CS. The dual action is super nice to have (not a must have though). I’d also recommend spending more on a better compressor before a brush (I got a simple 1gal compressor from California Air Tools).

They have a few plans, but the cheapest is $5/mo. If you go past the allotted searches it’s pay per search after that (at a very tiny cost).

I switched to DDG when Google started adding cards at the bottom of the first page and made search results utterly useless for me. DDG wasn’t bad but it still felt like something was missing or some results were flooded by a specific site. Kagi went the extra step to group results from a site sorta like how Google has.

Ultimately it’s the benefits of old Google but some nice refinements and QoL improvements. Because it’s paid for, they don’t need to sell your data or shove paid for results down your throat.

I was informed about Kagi through one of the posts here and tried it out. It’s quite amazing how much better it is compared to even DDG. I didn’t mind DDG but it felt “old” but Kagi seems to prioritize user experience over everything else. It may not be free, but it’s worth the cost for me.

The term you are looking for is “parametric”. You might be able to find a design you need through the many 3D printing file sites using that term. FreeCAD and Fusion360 are open used but another is OpenSCAD if you are more programming savvy than modeling savvy. There are plenty of recipes for threads in there to make your relatively simple design request here.

Tons of good and free options, you just gotta pick which one looks easiest for you.

Keep in mind that any hobby printer, especially those under ~$/€1k are subject to needing some level of tinkering to get reliable printing. If speed is unimportant, any of the options you provide will be a good fit. You will benefit from running some basic tuning for each spool of filament to get the best print quality. The speed can be dialed in to reduce failures but not take forever.

Build plate finish is more of a personal preference when it comes to PLA. Textured plate will provide slightly better grip to prevent the print from popping off mid-print, but it’s a visible and tactile texture to that surface. It would probably be best to have a both a texture and smooth plate on hand long term.

Enclosure mainly comes into play if you print high-shrink materials like ABS or ASA. If you don’t like to tinker, I wouldn’t try to enclose a prusa or ender and would save up for a design built for it. If you don’t mind tinkering a bit, you can always add the enclosure later.

Buying a used printer isn’t a terrible option, but I would get eyes on first to ensure it prints as-is, especially since you want it to be plug and play. People sell printers for a variety of reasons such as upgrading, lack of interest, lack of funding, etc.

Another vote for Porkbun here. I switched after Google Domains shared they were selling off to Squarespace. It’s been a lovely experience and their website just seems more human than the other big players. Cloudflare isn’t a terrible alternative option as long as you’ll be using their DNS.

It’s a mobile game, but Sandship kinda checks all those boxes.

• Slice & Dice is a fun game here and there
• Poweramp Equalizer is pretty nifty if you use decent headphones or swap listening devices frequently. You can save profiles per device.

I’ve been describing this as if Animal Crossing had an MMO. It’s cute, cartoony, and cozy/relaxing. It has all of the typical MMO activities but a very heavy focus on house building and customization. The fishing mini game is decent to not get too boring and the cooking skills are a fun mix of different mini games. Overall it’s a nice balance of freshness and QoL improvements for a nice chill gaming session. I’m excited to see where jt goes after launch!

It’s only cosmetics. It’s just getting to beta but they have a decent start to the store for clothing items for purchase. Doesn’t seem to be a terrible way at all. Aside from the tutorial mission about it, you could simply never interact with the storefront ever again.

It is so much an “Animal Crossing, the MMO” type of game. I’ve been having a blast in the closed beta. The house building aspect is surely what op is looking for. So many little details one can build out!

It’s too early to know how exactly it’ll be implemented, but I’d bet there would likely be a toggle/setting to turn on at the very least. I’m sure the upgrade instructions will be early laid out how to enable it.

Yes, the seller was Topton Computer Store. No complaints from me on the purchase/process!

I use a similar one of these (different io panel and case) for OPNSense and it’s been a delight. Not sure how well it would handle Plex but if you don’t need to transcode the files it should be fine. I bought one without ram, os, and storage for $150 last year. That listing isn’t available anymore.

The class keyword exists for a reason and it has a perfectly fine use case when you need to make use of creating new objects. I think it may be disliked because people come over from Java assuming you need to define everything as objects/classes when we have modules and other methods of doing the same thing with a little bit less clutter. I recommend reading up on the underlying functionality and how classes and objects work compared to modules.