There goes another “red line” without any meaningful response from russia.

They are technically correct in that it’s the developers fault that they tied themselves to a proprietary game engine.

In the other hand Godot was nowhere near mature when the slay the spire devs most likely started development. They would be dumb if they used unity for their next game 🤷

I’d guess that companies that failed to turn profit when money was cheap are most likely doomed. However not all of the hype companies are like that. Some could be barely profitable, but shareholder pressure might push them to heavier monetization practices.

To OP: this is a much clearer & better explanation for what I was trying to say.

This is an imperfect analogy, but think of updating between Windows 10 and 11 versus installing updates on windows 10 or win 11.

I have no experience with Fedora, but AFAIK at least in Ubuntu/Debian land, updates are installed from OS version specific package repositories. When the version of the OS is no longer supported, those repositories might not receive updates anymore.

EDIT: this is the main reason I have a rolling release distro on most of my personal machines. The package repos have the newest packages without having to update my OS major version every now and then.

When I did play foss games, I played battle for wesnoth, teeworlds, minetest, super tux csrt and openarena. Lsst one might be dead due to being a mainly multiplayer game.

This is what 3d printing really shines in. Churning out prototypes for minimum cost.

If you’re already familiar with blender, you would only need to learn how to use a slicer, which is not that hard in comparison. Just import the model and fiddle around with print settings if needed.

I came into 3d printing as a complete noob, and most of my time has been spent learning to do modeling in blender/cad. Slicing and printing itself is simple in comparison. Resin might be more involved.

Anyone got any idea how this would work at a high level? I get that for static images some neural nets are “reducing” noise from random/base images based on prompts, but is this based on the same idea?

Yes.

Seems like the ones that find it necessary to print color references are either using fancier materials or use a ton of different colors.

What happens, when the non smart microwave finally breaks and only smart ones are being sold? You could buy used, but what happens when that used inventory is used up?

Fortunately in case of microwaves, the simpler ones have the same internal parts as smart ones, and as such some supply is most likely going to be available.

The situation in the article is for sure unique, as replacing implants with a newer version is probably not feasible. Many other simpler medical devices are different, as they could be replaced as needed.

Going bankrupt is not the only potential issue. There can also be situations, where a company makes several generations of a product, and abandons support for the old ones.

This is already a serious concern with eg. older gen chip fabrication. The machinery required for each generation was built when that gen was new, and when that machinery breaks down, it might not be economical to rebuild that capability.

Is this really a year old post? It was a good read regardless.

To comment on the topic, this is going to happen more and more, especially as proprietary stuff becomes more and more complex. With implants it’s obviously more serious, but this also applies to anything from cars to game consoles.

I’m no stranger to scrounging junkyards for car parts or ebay to replace components from an old console. However that cannot go on forever, as parts get more rare. This is somewhat remedied with eg. nintendo consoles, where some reproduction parts are available (cartridges, screens etc.). With more niche and increasingly complex products this option is often not available.

An alternative browser based approach would be:

Mobile firefox + ublock + a video background play fix addon

Obviously you lose out on privacy unless using incognito mode.

Because what can I do?

I try to focus on being happy and living my own life. These things are civilization level issues, and last 50 years have shown the civilization’s fundamental incapability to face the issue, let alone attempt to solve it at any meaningful scale.

IMO there is nothing wrong with attempting to minimize one’s own carbon footprint, but the futile attempt to push for more significant changes will just lead to disappointment

Over 200h now. I rack up hours printing parts with 100% infill as they get annealed in the oven. Time will tell when I get issues. So far I’ve had to retighten the x axis belt once, but no other issues.

I get that the original plastic tension arms break after a while, but I hope that the metal arm on the neo will last longer. Can the softer extrusion gears be replaced with steel or some other stronger material?

I’ve been printing with my ender 3 for >200h now, and I’ve been happy with it. If possible get the Neo version. It has most of the features that people add to their printers later on, like auto bed leveling.

The tinkering part that people talk about in regards to the ender 3 seems to be an artifact from non Neo versions, as those are missing auto bed leveling and as such require more fiddling to get printing well. Also the non neo printers had plastic tension arms that would break over time.

So far my ender 3 neo has failed 2 prints, one when I originally configured the z-offset to be too high and the initial layer wouldn’t stick. Other time was some layer shifts due to me leaving the x axis belt too loose. In total I’ve spent maybe 3 hours fiddling with my printer and mostly it’s left alone, doing it’s thing.

Has meta given any indication that they want to federate with other instances?

Not new but probably done for cost saving purposes.

Very happy to see that such a strong migration is actually happening.