I’m confused how I would have written that as well. Coincidental for sure. I think I did have “modern” in the title initially and didn’t realize editing left it since it’s similar. I dunno.
I speak English and I’m actually old enough to know what modem stands for, unfortunately 😂.
edit: It was autocorrect apparently. It happened again and was almost impossible to detect because of the similarity.
I’ve posted it online now as well as included a pic of the LEDs lit up through the PETG pipes.
I’ll post it to Printables.com soon. I’m not sure how common the brittle plastic issue was but, yeah, there seem to be a lot of variations using this exact same case design.
I haven’t seen the LEDs yet since I’ve lost the power supply, but I’ve used the same PETG pipe technique a couple of times before and it works great.
I should have been more specific. I was hoping this fixes an issue with LO not scaling correctly when using multiple screens with different scaling factors. Unfortunately this is still an issue.
deleted by creator
Please tell me it fixes scaling issues on Wayland.
I feel like everybody is overlooking the fact that this person is getting an ad, to watch ads, after already paying for Premium.
I used BlueProximity for a number of years and it was great.
It eventually became defunct, but that link appears to be a fork to bring it somewhat up to date. I have not tested this new version though since I work from home now.
I think this satire whooshed most everybody who replied.
Even without the boot, I would think that a person’s thumb would hit the button regardless.
For most utilities (water, electricity), there’s a relatively linear relationship between the tangible value provided (energy used, water dispensed) and the cost to provide it (coal burned, water sourced/treated). Even for wind- or hydro-powered electricity, the amount that everybody uses has a proportional amount of wear on the system and consequent required maintenance.
But not so much for ISPs. Instead, you’re basically paying for a “fictional” amount (speed) of a non-tangible product. Granted, there is a linear relationship to the amount of electricity the ISP uses to provide each bit, but it’s negligible.
Instead, what you’re paying for with internet is essentially to recoup the fixed costs of the provider’s equipment. They do need to upgrade every so often to accommodate more capacity and faster speeds, but this is proportional to speeds provided and not data volume used.
*edit: replied to wrong comment
The --hold feature was introduced with snapd v2.58 which was released as recently as Dec 1, so less than 9 months ago. So I would consider this a relatively new feature.
Furthermore, as best as I can tell from the documentation, there isn’t even a way to configurably hold updates in general or for a specific package like can be done with apt-preferences; refresh.hold only allows 90 days out.
I think it is a perfectly valid criticism that the snap developers didn’t implement this feature at all until well into the life of the product and then, even then, done begrudgingly at best evidenced by the minimal implementation.
Now, I feel like I did my research, but feel free to let me know if there’s something I can do better or if you have any other general life advice for me.
Gen 10 checking in, still works flawlessly.
You can’t beat the ease of firmware updates either. lvfs/fwupdmgr take care of updates for both my laptop and Lenovo TB4 docking station.
Have you tried a new nozzle?
If your nozzle is worn flat (from scraping), it could affect your nozzle-bed gap (assuming no adjustment). If the internal diameter is worn (from long-term usage or an abrasive filament), it could cause a type of under-extrusion.
Try putting it in the freezer for a few minutes before trying to read the data. Or heat it up slightly.
This is an old trick I’ve used to recover data from a hard drive or two. I suppose it could help if the problem with the SD is some kind of microscopic fractures.
It should be emphasized that this is just a temporary workaround at best.
The Turris Omnia is an open, powerful router that comes with OpenWRT.
Turris adds an additional UI and features beyond that, but the OpenWRT UI is still available and the stock firmware can be completely replaced with OpenWRT if so desired.
It’s a bit pricey but has great specs (1.6 GHz dual core, 2GB RAM, 8GB eMMC) and is an excellent device for tinkerers with headers exposing UART, JTAG, GPIO, and more. It has three internal mPCIe ports as well.
I am not affiliated with Turris but just happened to stumble upon a new one at a garage sale a couple of days ago. Lucky find and I’m excited.