Pretty sure there’s not a per-domain setting for that. If you have HTTPS-Only Mode turned on in the settings it will always try to use HTTPS first and present a warning before switching to HTTP.

If you want to continue using HTTPS you can setup your own CA certificate to sign certificates for your .LAN domain names. All you need to do then is add the CA certificate to your trusted certificates in Firefox and the signed certificate to the device hosting the HTTPS service.

EDIT: TIL there an exclusion feature. Neat. I didn’t see this on Firefox for Android though. https://support.mozilla.org/en-US/kb/https-only-prefs

You mentioned ping. If you’re using Termux you may need to manually update its DNS settings (different from the system DNS). The file is /data/data/com.termux/files/usr/etc/resolv.conf

To make it roam you probably want your home dns first then some internet resolvers after that.

The -k argument on my openssl accepts a passphrase, not a file. You likely encrypted with the filename as the secret, not it’s contents. Perhaps you should use -kfile instead.

$ openssl aes-256-cbc -help
Usage: aes-256-cbc [options]

General options:
 -help               Display this summary
 -list               List ciphers
 -ciphers            Alias for -list
 -e                  Encrypt
 -d                  Decrypt
 -p                  Print the iv/key
 -P                  Print the iv/key and exit
 -engine val         Use engine, possibly a hardware device

Input options:
 -in infile          Input file
** -k val              Passphrase**
 -kfile infile       Read passphrase from file

Make or find yourself a cart to drag around (g or G to drag it). It it doesn’t have wheels it’ll be quite loud. Sound = attraction = death in most cases.

Don’t bother with cars for a long while, even one that actually runs. They take a lot to maintain and cause a lot of noise (see above). You’re better off starting with a bike for midrange transportation (or if using mods a foldable bike).

When you start building or find a nice base area, make a crafting nook and drop all your items nearby to it. When crafting you can pull ingredients from 1-2 tiles adjacent.

Yes, ULA are one of the exceptions I mentioned. It covers fc00::/7 which is fc00 to fdff, though I believe most use just the top half. I use one for an intermediate network between my edge router and my primary firewall to not consume one of my limited /64 networks.

I haven’t played with IPV6 NAT much. I know its use is a bit discouraged as NAT was always designed as a stopgap measure for IPV4 exhaustion. It might be a good option if you need additional space and your ISP doesn’t support additional prefixes. Just keep in mind that if you use these in DNS, they won’t be accessible externally.

Its a bit complicated and depends on your ISPs support level.

If your ISP supports basic IPv6 they will likely use SLAAC or DHCPv6 to advertise the /64 that any directly connected devices, like your router, can use (/64 being the default size for a single LAN segment, even between point-to-point connections). If you have devices behind that router that want to use IPv6, you will need additional prefixes. The most common method nowadays is to use Prefix Delegation (DHCPv6-PD) where your router will ask the upstream router for an additional routeable prefix which you will use on another interface of the router. The RFC for prefix delegation recommends a /48, but many ISPs are not delegating that much. I only get half of a /60 from my ISP’s modem.

If the ISP just provides you a static routeable prefix, then you would just assign that to your router’s interface and enable SLAAC/DHCPv6 to give out that prefix. This would only need to be configured in a single device and is why they don’t recommend hard coding servers and workstations with IPV6 addresses.

Keep in mind that your router will also need a firewall as all of these IPv6 prefixes are routeable and public. While IPV6 space is quite like finding a needle in a haystack, you could still find yourself having a bad day if you treat it like private IPV4 space.

The end result though is that you would setup DNS so that devices register their IPv6 addresses and it just works. There’s also the MDNS protocol that supports IPv6 which will do segment-local resolution for device names.

On one hand you definitely don’t want to be assigning manual/static IPv6 to all your devices because if your prefix ever changes you’ll have to update it everywhere. IPv6 doesn’t really have a concept of private address space (with a few exceptions). On the other hand most modern IPv6 stacks support dynamic protocols like SLAAC while also assigning a static suffix to the published prefix (e.g. You want :0:0:1234:1 to go to your server, and SLAAC gets the prefix 200x::5678/64 your server would assign itself 200x::5678:0:0:1234:1).

DHCPv6 fixes a lot of these headaches for managed networks by allowing you to reserve specific IPv6 for a given DUID.

IMO, your network, do what you want. I have two jump Raspberry PIs that I have static suffixes so I always know where they are without relying on DNS or whatever. Edit: I apparently misremembered how I had these setup. I use a custom interface up script to take the SLAAC prefix and append the custom suffix to it as a secondary IP.

You’ll probably have to provide the netmask info for us to review. If you’re using /24 then those all reside in the same network so I would expect them to be in the same broadcast domain.

If you have mismatched netmasks that could be trying to route traffic to the gateway which then reflects back. Ensure your devices have the same network, netmask and broadcast ip (e.g. 192.168.1.0/24 will have broadcast ip of 192.168.1.255)

I was thinking this too, if you have an open-ended 4x slot it can fit a 16x card but only runs at 4x.

TBH if you’re running 10Gb you may want to look for a board with on-board 10Gb rather than a PCIE which will save you the slot. My HP server has a swapable daughter board for the nic so you can chose 4x1Gb or 4x10Gb.

For my part, to get Jellyfin to recognize some of my shows/movies properly I had to export the Metadata which properly detected most. If that doesn’t work Jellyfin might be ignoring them due to decoding issues. Would be worth checking the log while rescanning to see if there’s an error or access issue.

As an aside, these are the client logs, check the /var/log/ auth.log or secure files or journalctl to see if the server logged why the access was denied.

You’ve always been able to run unsigned or unpackaged add-ons with developer mode. What’s wrong with that? This only affects packages uploaded to AMO.

Microsoft publishes a learning platform that covers a large amount of topics, from Windows Server to Azure services. I used it to prepare for an Azure DevOps Database Administration certification. Should be a good place to start as it’s free. Just search for what you’re looking to learn or select a product from the filters and off you go. https://learn.microsoft.com/en-us/training/

Neat. I remember me and my friends trying to come up with enough stuff to build our own world. Pretty sure we didn’t but still cool to see all the player built stuff.

Looks like 1.4.1 is the first Graal Reborn revision. Don’t see a 1.4.0 anywhere. Are you running the server as well or just the client?

The other option to the server that was posted is to get a DAS Enclosure that you can then hook up to a server or anything that can use a SAS/SATA card. These are generally going to be cheap because it is just a SAS/SATA backplane/expander.

Edit: eBay is useless. Here’s an example DAS https://www.aventissystems.com/HPE-MSA30-DAS-Storage-Basic-p/200051.htm

For the disks, you may have a small issue with having multiple types of disks in a single RAID10, as those disks might have slightly different physical attributes. ZFS is an option here as you can add two vdevs for the different drive types and add them to the same zpool, which effectively creates the RAID10 you’re looking for. You would typically not use LVM on top of ZFS but if you go with RAID10 it would let you create logical partitions that can be expanded easily at a later time.

Another ZFS option is to use RAIDZ1 with the 4 disks in a vdev. The vdev will use 1 disk of space across all disks to maintain a parity with the other disks. You will have 12TB of usable storage on your 16TB raw storage. This will allow you to lose one drive with no data loss.

I mean it was not too long ago there was a bug which could lead to an unauthenticated RCE against Bluetooth on Android.

https://nvd.nist.gov/vuln/detail/CVE-2022-20345

So yea, reducing surface area of attack when a feature is not needed is kinda important.

My line of business is entirely a Microsoft shop so everything we’ve ever written has been for MSSQL.

That being said, I can understand the benefits of having a choice in backend. For example, for our Zabbix deployment some engineer just installed mariadb+zabbix on a server and called it a day. This has caused us no end of troubles (ibdata misconfigured, undo files too small, etc). After the last time I had to rebuild it due to undo file corruption I swore that if it broke again I was switching to postgres. So far knocks on wood we haven’t had any major issues. We’re still looking into and planning for a postgres migration but we’re hoping to hold out for a little longer prep time.

Maybe I should contribute a MSSQL engine for Zabbix so I can move it to a platform I’m more comfortable with. ;)

It’s likely a Google Console verification file to show you own the domain (e.g. to make changes to search results). It has to be published to the site with a random url that only the owner and Google know, but it’s still a public file. I don’t think it’s an issue if it’s stored in source as Google will query the site and not the source for that file.

If OP is concerned they can also change the verification method: https://support.google.com/webmasters/answer/9008080?hl=en

The creator’s clear check doesn’t count towards the level being cleared, so these levels are uncleared. I think if the creator plays it on the uploader account it wouldn’t count either.