Had to fit HDMI & Displayport cables through 25mm/1 inch electrical conduit (building static limits it to 25mm). The issue is that the connector won’t fit through the commercial 90-degree corners.
Solution? Enlarge the profile while keeping the bending radius:
Some CAD and a 3D print later I have the solution no money can buy. That’s the power of 3D-printing and modeling.
UL94 V0 filament is available: PLA, PETG, ABS, PC and probably more.
V0 means stops burning within 10 seconds and
no dripping. That’s good enough for these applications.edit: apparently dripping is allowed as long as those aren’t flammable. Regardless most V0-rated filaments don’t drip as the “charcoal” when exposed to fire.
Whew, I for one, am glad a little dripping is allowed.
It’s not weird. It’s not gross. It’s normal and it’s allowed.