ExtremeDullard@lemmy.sdf.org to 3DPrinting@lemmy.worldEnglish · 8か月前Bambu Lab Firmware Update Forces Cloud Dependency & User Lock-In - AVOID THEIR 3D PRINTERS!youtu.bevideomessage-square138fedilinkarrow-up1540arrow-down113cross-posted to: 3dprinting@lemmy.ml
arrow-up1527arrow-down1videoBambu Lab Firmware Update Forces Cloud Dependency & User Lock-In - AVOID THEIR 3D PRINTERS!youtu.beExtremeDullard@lemmy.sdf.org to 3DPrinting@lemmy.worldEnglish · 8か月前message-square138fedilinkcross-posted to: 3dprinting@lemmy.ml
minus-squaretoynbee@lemmy.worldlinkfedilinkEnglisharrow-up1·7か月前I think my first print was with the touch screen. I printed a few things by sending directly from the Qidi slicer that came with it, but it pretty consistently is crashing at 40-80% when connecting through the network. I’ve been using the web interface directly and that’s going pretty well.
I think my first print was with the touch screen.
I printed a few things by sending directly from the Qidi slicer that came with it, but it pretty consistently is crashing at 40-80% when connecting through the network. I’ve been using the web interface directly and that’s going pretty well.