Depending on what you’re trying to do, you can get EL panels and EL tape which can be cut to custom size & shape, and the part connected to the wire will still work (even with holes punched through it).
It’s also possible to make EL paint and coat surfaces with it, though definitely an involved process and not cheap. Lumilor sells EL paint kits which were used in this youtube video to coat various surfaces. This article from Hackaday specifically mentions painting 3D printer objects, but I didn’t see any examples.
Thanks, i hoped there was a filament that could do that without extra steps. Maybe in the future
You won’t see it in your lifetime.
The closest you can get is glow in the dark filament.
Or UV filament with a UV light
Depending on what you’re trying to do, you can get EL panels and EL tape which can be cut to custom size & shape, and the part connected to the wire will still work (even with holes punched through it).
It’s also possible to make EL paint and coat surfaces with it, though definitely an involved process and not cheap. Lumilor sells EL paint kits which were used in this youtube video to coat various surfaces. This article from Hackaday specifically mentions painting 3D printer objects, but I didn’t see any examples.
Here’s a project that used conductive filament as a base for an EL surface
Here is an alternative Piped link(s): https://piped.video/watch?v=eUUupR-ongs
Piped is a privacy-respecting open-source alternative frontend to YouTube.
I’m open-source, check me out at GitHub.