https://imgchest.com/p/na7klqbby8d

So along the two sides that aren’t sticking properly, they were kind of bridged on there which explains the issues, however my second attempt printing with supports resulted in the same issues. I’m wondering why that is. I’m going to start printing with the fans off to see if that is the issue, everything else looks fine though. Let me know if you guys have any advice for better quality prints.

  • hibbfd@kbin.social
    link
    fedilink
    arrow-up
    2
    ·
    1 year ago

    typically the fan cooling the heatbreak and extruder stays on even with the “extruder” aka part cooler fan turned off