In my experience you won’t actually boil water in the microwave because it takes an eternity so you end up with tea in “warm” water instead. Or apparently some people also put the tea bag in the microwave ¯\_(ツ)_/¯
It may appear that way if it was unevenly heated, causing pockets of boiling water surrounded by comparatively cool water. This would make it look like it’s boiling, but then, when mixed, it is then much cooler than if heated by a kettle that relies on convection to mix the water.
Water warmed in a kettle has much more even temperature in all points, which affects the brewing process. Generally, the more even the temperature is, the more consistent and rich is your brew.
I would consider microwave boiling as a makeshift method to produce a mediocre result when you need it anyway, not as a daily driver.
How does a kettle warm the water more evenly but a microwave doesn’t? When a kettle has it’s heating element only at the bottom but a microwave blasts the entire mass of water with energy because it sits on a rotating plate.
I’m asking this from a place of genuine ignorance: how does the evenness of the heat distribution matter when microwaving a pure liquid? I’m familiar with the microwave’s uneven heating qualities. I’m sure we’ve all bit into food that is scalding hot on the surface and still lukewarm at best in its interior. However, I’ve always presumed that is a product of microwaving a heterogenous, predominantly solid substance.
So, sure, the microwave applies heat unevenly to the water. But wouldn’t the tiny little bits of water which get “over” heated simply diffuse their excess thermal energy into the rest of the homogenous volume in very short order? Furthermore,wouldn’t an uneven heat distribution in a mug of water simply lead to convection currents flowing from hot to cold, therefore promoting a relatively even distribution?
The overheated particles will rapidly move upwards, which will lead to relatively even distribution in a layer, but uneven between heights.
In fact, in a large microwaved mug the difference between top and bottom can be as much as 6°C/11°F.
Using a kettle mitigates it for the most part, as it is the bottom that gets continuously heated, and the top is then naturally heated by the vertical currents of hot water, leading to a more even distribution.
But at that point, isn’t it easier to just buy a kettle? It doesn’t require such manipulations, costs next to nothing and allows you to rapidly boil up to 1,5-2L (0,4-0,5 gal) of water for all your needs.
There’s a good reason most of the (Western, at least, dk about other places) world uses them and considers them a basic piece of kitchenware.
The microwaves will heat your water more evenly than a kettle.
Liquids have this amazing property, that if you heat them , they auto-stir just by themselves.
(But personally, I’m uneasy about microwaving a tea bag with paper on one end, or worse, a staple. There’s probably no problem at all, but it doesn’t feel that way.)
Ok, but, why is microwaved water any different the water warmed in a kettle?
This seems like a pointless thing to get worked up over.
Went to see Randall doing his book promo and being interviewed by Matt Parker (in the UK) recently and this was his exact position on it
The audience were not on his side 😆
In my experience you won’t actually boil water in the microwave because it takes an eternity so you end up with tea in “warm” water instead. Or apparently some people also put the tea bag in the microwave ¯\_(ツ)_/¯
Brother it takes 3 minutes to boil water in the microwave. I have done this without fail.
It cools down much faster though. Not sure how that works.
It doesn’t cool down faster. That makes no sense.
Listen I can’t prove it, but I swear on my mother it does
It may appear that way if it was unevenly heated, causing pockets of boiling water surrounded by comparatively cool water. This would make it look like it’s boiling, but then, when mixed, it is then much cooler than if heated by a kettle that relies on convection to mix the water.
You can prove it by boiling the water in different ways, putting a thermometer inside and then filming/timing it :D
Because only some of the water boils, not all of it.
My microwave must be really weak then. The kettle is still faster though
It definitely depends on the microwave. In my office, one boils a mug in 2:20, while the other requires over 3 min
Water warmed in a kettle has much more even temperature in all points, which affects the brewing process. Generally, the more even the temperature is, the more consistent and rich is your brew.
I would consider microwave boiling as a makeshift method to produce a mediocre result when you need it anyway, not as a daily driver.
How does a kettle warm the water more evenly but a microwave doesn’t? When a kettle has it’s heating element only at the bottom but a microwave blasts the entire mass of water with energy because it sits on a rotating plate.
Exactly because of that.
Hot water moves upwards, and if you heat it from the bottom, you get a more even result than if you blast it from all sides.
Cold water falls to the bottom of a kettle and boils on the bottom. Microwaves can miss the bottom, possibly?
Boiling water mixes itself, also: no
I’m asking this from a place of genuine ignorance: how does the evenness of the heat distribution matter when microwaving a pure liquid? I’m familiar with the microwave’s uneven heating qualities. I’m sure we’ve all bit into food that is scalding hot on the surface and still lukewarm at best in its interior. However, I’ve always presumed that is a product of microwaving a heterogenous, predominantly solid substance.
So, sure, the microwave applies heat unevenly to the water. But wouldn’t the tiny little bits of water which get “over” heated simply diffuse their excess thermal energy into the rest of the homogenous volume in very short order? Furthermore,wouldn’t an uneven heat distribution in a mug of water simply lead to convection currents flowing from hot to cold, therefore promoting a relatively even distribution?
The overheated particles will rapidly move upwards, which will lead to relatively even distribution in a layer, but uneven between heights.
In fact, in a large microwaved mug the difference between top and bottom can be as much as 6°C/11°F.
Using a kettle mitigates it for the most part, as it is the bottom that gets continuously heated, and the top is then naturally heated by the vertical currents of hot water, leading to a more even distribution.
Surely stirring the water in the microwaved mug and giving it another round easily solves this issue.
Microwaved water can sometimes explode after being disturbed by stirring or adding coffee/tea bag:
https://youtu.be/0JOxuS0SBHc?si=brwRSWznsjPxqo5C
Ideally 2 to 3 rounds, yes.
But at that point, isn’t it easier to just buy a kettle? It doesn’t require such manipulations, costs next to nothing and allows you to rapidly boil up to 1,5-2L (0,4-0,5 gal) of water for all your needs.
There’s a good reason most of the (Western, at least, dk about other places) world uses them and considers them a basic piece of kitchenware.
In the US, kettles are supposedly much slower than a microwave or even a hob due to their grid.
Fair enough; but even then, American kettles can boil water at a very reasonable time (3 minutes for 1,5L?)
Still, I can understand how that extra minute alters the choice for many.
Could be a problem if you microwave it together with the tea bag.
Also I find microwaves to not heat up the water properly, leaving some cold spots.
Hard to believe that cold spots could stay for more than a moment with the Brownian motion.
Do you not add gelatin to your water before making tea?
Modified corn starch, miss me with those animal products (I actually am not vegan).
So give it a quick stir? Also if it’s at a boil, the bubbles are going to mix the fluid well.
The microwaves will heat your water more evenly than a kettle.
Liquids have this amazing property, that if you heat them , they auto-stir just by themselves.
(But personally, I’m uneasy about microwaving a tea bag with paper on one end, or worse, a staple. There’s probably no problem at all, but it doesn’t feel that way.)